UCLA Micro and Nano Manufacturing Laboratory » Annie http://cjmems.seas.ucla.edu Wed, 08 May 2013 18:50:23 +0000 en hourly 1 http://wordpress.org/?v=3.0.1 1995 Publications http://cjmems.seas.ucla.edu/?p=194 http://cjmems.seas.ucla.edu/?p=194#comments Fri, 04 Feb 2011 18:03:31 +0000 Annie http://cjmems.seas.ucla.edu/wordpress/?p=194 Book Chapters
  1. C.-J. Kim, “Book Review for Integrating Reliability into Microelectronics Manufacturing by A. Christou, Wiley, England, 1994”, in Reliability Engineering and System Safety, Vol. 48, 1995, pg. 71.

Conference Papers

  1. Y.-J. Yang and C.-J. Kim, “Stability Criteria for Switching of a Bistable Microactuator”, Proc. Dynamic Systems and Control Vol. 2 (DSC-Vol. 57-2), ASME Int. Mechanical Engineering Congress and Exposition, San Francisco, CA, Nov. 1995, pp. 861-870.
  2. Y. Joo, K. Dieu, and C.-J. Kim, “Air Cooling of IC Chip with Novel Microchannels Monolithically Formed on Chip Front Surface”, Cooling and Thermal Design of Electronic Systems (HTD-Vol. 319 & EEPD-Vol. 15), ASME Int. Mechanical Engineering Congress and Exposition, San Francisco, CA, Nov. 1995, pp. 117-121.
  3. Y.-J. Yang and C.-J. Kim “Testing and Characterization of a Bistable Snapping Microactuator Based on Thermo-Mechanical Analysis”, Tech. Dig. 8th Int. Conf. Solid-State Sensors and Actuators (Transducers ’95), Stockholm, Sweden, June 1995, Vol. 2, pp. 337-340.
  4. G. Lin, C.-J. Kim, S. Konishi, and H. Fujita, “Design, Fabrication, and Testing of a C-Shape Actuator”, Tech. Dig. 8th Int. Conf. Solid-State Sensors and Actuators (Transducers ’95), Stockholm, Sweden, June 1995, Vol.2, pp. 416-419.
  5. C.-J. Kim and Y.-J. Yang, “A Bistable Microactuator and Its Mechanical Analysis”, Joint Applied Mechanics and Materials Summer Conference of ASME, Los Angeles, CA, June 1995, pp. 239-240.
  6. Y.-J. Yang and C.-J. Kim, “Dynamics of a Bistable Snapping Microactuator”, Proc. Smart Structures and Integrated Systems (SPIE Proc. Vol. 2443), Smart Structures and Materials 1995, San Diego, CA, Feb. 1995, pp. 754-762.
  7. Y. Joo, K. Dieu, and C.-J. Kim, “Fabrication of Monolithic Microchannels for IC Chip Cooling,” Proc. IEEE Micro Electro Mechanical Systems Workshop, Amsterdam, The Netherlands, Jan.-Feb. 1995, pp. 362-367.
]]> http://cjmems.seas.ucla.edu/?feed=rss2&p=194 0 1996 Publications http://cjmems.seas.ucla.edu/?p=192 http://cjmems.seas.ucla.edu/?p=192#comments Fri, 04 Feb 2011 17:57:02 +0000 Annie http://cjmems.seas.ucla.edu/wordpress/?p=192 Journal Papers
  1. J. Y. Yee, K. Chun, J. D. Lee, and C.-J. Kim, “Polysilicon Surface-Modification Technique to Reduce Sticking of Microstructures”, Sensors and Actuators, Vol. A52, Nos. 1-3, April 1996, pp. 145-150.

Conference Papers

  1. J. H. Lee, K. H Park, C. S. Lee, J. T. Baek, C.-J. Kim, and H. J. Yoo, “Fabrication of Surface-Micromachined Polysilicon Microactuators Using HF Gas-Phase Etching Process”, Proc. MEMS (DSC-Vol. 59), ASME Int. Mechanical Engineering Congress and Exposition, Atlanta, GA, Nov. 1996 pp. 373-377.
  2. F.-G. Tseng, C. Linder, C.-J. Kim, and C.-M. Ho , “Control of Mixing with Micro-Injectors for Combustion Application”, Proc. MEMS (DSC-Vol. 59), Application of Microfabrication to Fluid Mechanics, ASME Int. Mechanical Engineering Congress and Exposition, Atlanta, GA, Nov. 1996, pp. 183-187.
  3. J. Zhu, D. Wang, C.-J. Kim, and G.P. Carman, “Development of Mesoscale Actuation Device”, Proc. ASME Aerospace Division (AD-Vol. 52), ASME Int. Mechanical Engineering Congress and Exposition, Atlanta, GA, Nov. 1996, pp. 649-654.
  4. S. Saffer, J. Simon, C.-J. Kim, “Mercury-Contact Switching with Gap-Closing Microcantilever”, Proc. SPIE Vol. 2882, Micromachined Devices and Components II, Austin, TX, Oct. 1996, pp. 204-209.
  5. B. Shivkumar and C.-J. Kim, “Electroplated Microrivets for Wafer Joining”, Proc. Micromachining Workshop III – Technology and Application, American Vacuum Society, Anaheim, CA, Sept. 1996, 2 pages (unpaged volume).
  6. T. K. Jun and C.-J. Kim, “Microscale Pumping with Traversing Bubble in Microchannels”, Tech. Dig. Solid-State Sensor and Actuator Workshop, Hilton Head Island, SC, June 1996, pp. 144-147.
  7. L. V. Ngo, P. R. Nelson, and C.-J. Kim, “Surface-Micromachined Beams without Spring Effect of Anchor Step-Up”, Tech. Dig. Solid-State Sensor and Actuator Workshop, Hilton Head Island, South Carolina, June 1996, pp. 140-143.
  8. J. Simon, S. Saffer, and C.-J. Kim, “A Micromechanical Relay with a Thermally-Driven Mercury Micro-Drop”, Proc. IEEE Micro Electro Mechanical Systems Workshop, San Diego, CA, Feb. 1996. pp. 515-520.
  9. P. Huang, J. Zhu, C.-J. Kim, and G.P. Carman, “Micro-Scale Tensile Testing of Single Crystal Silicon”, Symp. Mechanical Testing of Small Specimens, 1996 ASME Mechanics and Materials Conference, Baltimore, MD, June 1996, pg. 306.
]]> http://cjmems.seas.ucla.edu/?feed=rss2&p=192 0 1997 Publications http://cjmems.seas.ucla.edu/?p=188 http://cjmems.seas.ucla.edu/?p=188#comments Fri, 04 Feb 2011 17:43:33 +0000 Annie http://cjmems.seas.ucla.edu/wordpress/?p=188 Book Chapters
  1. Y.-C. Tai and C.-J. Kim, “Microelectromechanical Systems (MEMS)”, in The Industrial Electronics Handbook, Edited by J. D. Irwin, CRC Press and IEEE Press, 1997, pp. 1468-1471.

Journal Papers

  1. J. Simon, S. Saffer, and C.-J. Kim, “A Liquid-Filled Microrelay with a Moving Mercury Micro-Drop”, J. Microelectromechanical Systems, Vol. 6, No. 3, Sept. 1997, pp. 208-216.
  2. B. Shivkumar and C.-J. Kim, “Microrivets for MEMS Packaging: Concept, Fabrication and Strength Testing”, J. Microelectromechanical Systems, Vol. 6, No. 3, Sept. 1997, pp. 217-225.
  3. Y.-I. Lee, K.-H. Park, J. Lee, C.-S. Lee, H.J. Yoo, C.-J. Kim, and Y.-S. Yoon, “Dry Release for Surface Micromachining with HF Vapor-Phase Etching”, J. Microelectromechanical Systems, Vol. 6, No. 3, Sept. 1997, pp. 226-233.

Conference Papers

  1. J. Simon, L.-S. Huang, B. Sridharan, and C.-J. Kim, “Microgasketing and Room Temperature Wafer Joining for Liquid-Filled MEMS Devices”, Proc. MEMS, (DSC-Vol. 62 / HTD-Vol. 354) ASME Int. Mechanical Engineering Congress and Exposition, Dallas, TX. Nov. 1997, pp. 29-34.
  2. D. Wang, H. Alexander, Q. Chen, G.P. Carman, C.-J. Kim, and C.-M. Ho, “Piezoelectrically Driven Meso-Scale Actuator Device for Aerodynamic Control”, Proc. 38th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference and Exhibit and AIAA/ASME/AHS Adaptive Structures Forum, Kissimmee, FL, Apr. 1997, pp. 1738-1746.
  3. K. Ho, P. Jardine, G. P. Carman, C.J. Kim, “Modeling and Measuring the Response Times of Thin Film TiNi”, Smart Structures and Materials 1997: Smart Materials Technologies (SPIE Vol. 3040), San Diego, CA, March 1997, pp. 10-22 (Invited paper).
  4. B. Shivkumar and C.-J. Kim, “Microriveting – A New Wafer Joining Method”, Proc. IEEE Micro Electro Mechanical Systems Workshop, Nagoya, Japan, Jan. 1997, pp. 197-202.
  5. John Y. Kim and C.-J. Kim, “Comparative Study of Various Release Methods for Polysilicon Surface Micromachining”, Proc. IEEE Micro Electro Mechanical Systems Workshop, Nagoya, Japan, Jan. 1997, pp. 442-447.
]]> http://cjmems.seas.ucla.edu/?feed=rss2&p=188 0 1998 Publications http://cjmems.seas.ucla.edu/?p=185 http://cjmems.seas.ucla.edu/?p=185#comments Fri, 04 Feb 2011 17:33:35 +0000 Annie http://cjmems.seas.ucla.edu/wordpress/?p=185

Journal Papers

  1. J. Simon, S. Saffer, F. Sherman, and C.-J. Kim, “Lateral Polysilicon Microrelays with a Mercury Micro-Drop Contact”, IEEE Trans. Industrial Electronics, Vol. 45, No. 6, Dec. 1998, pp. 854-860.
  2. T. K. Jun and C.-J. Kim, “Valveless Pumping using Traversing Vapor Bubbles in Microchannels”, J. Applied Physics, Vol. 83, No. 11, June 1998, pp. 5658-5664.
  3. Q. Chen, D.-J. Yao, C.-J. Kim, and G. P. Carman, “Development of Mesoscale Actuator Device with Micro Interlocking Mechanism”, J. Intelligent Material Systems and Structures, Vol. 9, No. 4, June 1998, pp. 449-457.
  4. J. J.-Y. Gill, L.V. Ngo, P. R. Nelson, and C.-J. Kim, “Elimination of Extra Spring Effect at the Step-Up Anchor of Surface-Micromachined Structure”, J. Microelectromechanical Systems, Vol. 7, No. 1, March 1998, pp. 114-121.
  5. C.-J. Kim, J. Y. Kim, and B. Sridharan, “Comparative Evaluation of Drying Techniques for Surface Micromachining”, Sensors and Actuators, Vol. 64, No. 1, Jan. 1998, pp. 17-26.

Conference Papers

  1. L.-S. Huang, B. Sridharan, C.-J. Kim, S. D. Collins, C. Gonzalez, and R. L. Smith, “Self-Assembled Microslider for MicroJoinery”, Proc. MEMS (DSC-Vol. 66), ASME Int. Mechanical Engineering Congress and Exposition, Anaheim, CA. Nov. 1998, pp. 499-504.
  2. Q. Chen, D.-J. Yao, C.-J. Kim, and G. P. Carman, “Influence of Fabrication and Crystal Orientation on the Strength of Silicon Microridges”, Proc. MEMS (DSC-Vol. 66), ASME Int. Mechanical Engineering Congress and Exposition, Anaheim, CA. Nov. 1998, pp. 413-420.
  3. F. Tseng, C.-J. Kim, and C.-M. Ho, “A Microinjector Free of Satellite Drops and Characterization of the Ejected Droplets”, Proc. MEMS (DSC-Vol. 66), ASME Int. Mech. Engineering Congress and Exposition, Anaheim, CA. Nov. 1998, pp. 89-95.
  4. J. Lee and C.-J. Kim, “Microactuation by Continuous Electrowetting Phenomenon and Silicon Deep RIE Process”, Proc. MEMS (DSC-Vol. 66), ASME Int. Mechanical Engineering Congress and Exposition, Anaheim, CA. Nov. 1998, pp. 475-480.
  5. C.-J. Kim, “Microgasketing and Adhesive Wicking for Fabrication of Micro Fluidic Devices”, Proc. Vol. 3515, Microfluidic Devices and Systems, SPIE Symp. Micromachining and Microfabrication, Santa Clara, CA, Sept. 1998, pp. 286-291 (invited paper).
  6. L.-S. Huang, S.-S. Lee, E. Motamedi, M. C. Wu, and C.-J. Kim, “Optical Coupling Analysis and Vibration Characterization for Packaging of 2×2 MEMS Vertical Torsion Mirror Switches”, Proc. Vol. 3513, Microelectronic Structures and MEMS for Optical Processing IV, SPIE Symp. Micromachining and Microfabrication, Santa Clara, CA, Sept. 1998, pp. 135-143.
  7. C.-J. Kim, “Microelectromechanical Systems (MEMS) at the UCLA Micromanufacturing Lab”, Dig. Papers, Int. Microprocesses and Nanotechnology Conf. (MNC’98), Kyungju, Korea, July 1998, pp. 54-55. (invited paper)
  8. F.-G. Tseng, C. S. Shih, C.-J. Kim, and C.-M. Ho, “Characterization of Droplet Injection Process of a Microinjector”, Book of Abstracts, 13th U.S. National Congress of Applied Mechanics, Gainesville, FL, June 1998, TB3 (unpaged volume).
  9. B. Sridharan and C.-J. Kim, and Long-Sun Huang, “Post-Packaging Release: A New Concept for Surface-Micromachined Devices”, Tech. Dig., Solid-State Sensor and Actuator Workshop, Hilton Head Island, SC, June 1998, pp. 225-228.
  10. S.-S. Lee, L.-S. Huang, C.-J. Kim, and M. C. Wu, “2×2 MEMS Fiber Optic Switches with Silicon Sub-mount for Low-Cost Packaging”, Tech. Dig., Solid-State Sensor and Actuator Workshop, Hilton Head Island, SC, June 1998, pp. 281-284.
  11. G. Chen, S.Q. Zhou, D.-Y. Yao, C.-J. Kim, X.Y. Zheng, Z.L. Liu, K.L. Wang, X.Sun, and M.S. Dresselhaus, “Heat Conduction in Alloy-Based Superlattices”, Proc. 17th Int. Conf. Thermoelectrics, Nagoya, Japan, May 1998, pp. 202-205.
  12. L.-S. Huang, S.-S. Lee, E. Motamedi, M. C. Wu, and C.-J. Kim, “MEMS Packaging for Micro Mirror Switches”, Proc. 48th Electronic Components & Technology Conference, Seattle, WA. May 1998, pp. 592-597.
  13. J. Kim, J. Simon, S. Saffer, and C.-J. Kim, “Mercury Contact Micromechanical Relays”, Proc. 46th Annual Int. Relay Conf, Oak Brook, IL, Apr. 1998, pp. 19-1-19-8.
  14. Q. Chen, D.-J. Yao, C.-J. Kim, and G. P. Carman, “Frequency Response of an Inchworm Motor Fabricated with Micro Machined Interlocking Surface Mesoscale Actuator Device (MAD)”, Proc. SPIE Vol. 3329, Conf. Smart Structures and Integrated Systems, San Diego, CA, Mar. 1998, pp. 768-779.
  15. J. Lee and C.-J. Kim, “Liquid Micromotor Driven by Continuous Electrowetting”, Proc. IEEE Micro Electro Mechanical Systems Workshop, Heidelberg, Germany, Jan. 1998, pp. 538-543.
  16. Q. Chen, D.-J. Yao, C.-J. Kim, and G.P. Carman, “Mesoscale Actuator Device with Micro Interlocking Mechanism”, Proc. IEEE Micro Electro Mechanical Systems Workshop, Heidelberg, Germany, Jan. 1998, pp. 384-389.
  17. F.-G. Tseng, C.-J. Kim, and C.-M. Ho, “A Novel Microinjector with Virtual Chamber Neck”, Proc. IEEE Micro Electro Mechanical Systems Workshop, Heidelberg, Germany, Jan. 1998, pp. 57-62.
  18. F. Sherman, S. Tung, C.-J. Kim, C.-M. Ho, and J. Woo, “In-Plane Microactuator for Fluid Control Application”, Proc. IEEE Micro Electro Mechanical Systems Workshop, Heidelberg, Germany, Jan. 1998, pp. 454-459.
]]> http://cjmems.seas.ucla.edu/?feed=rss2&p=185 0 1999 Publications http://cjmems.seas.ucla.edu/?p=183 http://cjmems.seas.ucla.edu/?p=183#comments Fri, 04 Feb 2011 17:29:25 +0000 Annie http://cjmems.seas.ucla.edu/wordpress/?p=183 Journal Papers
  1. T. Yi and C.-J. Kim, “Measurement of Mechanical Properties for MEMS Materials”, Measurement Science and Technology, Vol. 10, No. 8, Aug. 1999, pp. 706-716.
  2. F. Sherman, S. Tung, C.-J. Kim, C.-M. Ho, and J. Woo, “Flow Control by Using High-Aspect-Ratio, In-Plane Microactuators”, Sensors and Actuators, Vol. 73, 1999, pp. 169-175.
  3. Q. Chen, D.-J. Yao, C.-J. Kim, and G. P. Carman, “Mesoscale Actuator Device: Micro Interlocking Mechanism to Transfer Macro Load”, Sensors and Actuators, Vol. 73, Issues 1-2, March 1999, pp. 30-36.
  4. S.-S. Lee, L.-S. Huang, C.-J. Kim, and M. C. Wu, “Free-Space Fiber-Optic Switches Based on MEMS Vertical Torsion Mirrors”, J. Lightwave Technology, Vol. 17, No. 1, Jan. 1999, pp. 7-13.

Conference Papers

  1. C.-J. Kim, “MEMS Devices Based on the Use of Surface Tension”, Proc. Int. Semiconductor Device Research Symposium (ISDRS’99), Charlottesville, VA, Dec., 1999, pp. 481-484 (Invited).
  2. J. Lee and C.-J. Kim, “Theory and Modeling of Continuous Electrowetting Microactuation”, Proc. MEMS (MEMS-Vol. 1), ASME Int. Mechanical Engineering Congress and Exposition, Nashville, TN, Nov. 1999, pp. 397-403.
  3. T. Yi and C.-J. Kim, “Tension Test with Single-Crystalline-Silicon Microspecimen,” Proc. MEMS (MEMS-Vol. 1), ASME Int. Mechanical Engineering Congress and Exposition, Nashville, TN, Nov. 1999, pp. 81-86.
  4. X. Li, S. Kiyawat, and C.-J. Kim, “High-Aspect-Ratio Electroplated Structures with 2mm Beamwidth,” Proc. MEMS (MEMS-Vol. 1), ASME Int. Mechanical Engineering Congress and Exposition, Nashville, TN, Nov. 1999, pp. 25-30.
  5. Y.-K. Lee, U.-C. Yi, F.-G. Tseng, C.-J. Kim, and C.-M. Ho, “Fuel Injection by a Thermal Microinjector,” Proc. MEMS (MEMS-Vol. 1), ASME Int. Mechanical Engineering Congress and Exposition, Nashville, TN, Nov. 1999, pp. 419-425.
  6. C.-J. Kim, “MEMS Education Program at UCLA”, Proc. 5th Int. Micro-Machines Symp., Tokyo, Japan, Oct. 1999, pp. 121-123 (Invited).
  7. D.-J. Yao, C.-J. Kim, G. Chen, J.-P. Fleurial, H. B. Lyon, “Spot Cooling Using Thermoelectric Microcooler”, Proc. 18th Int. Thermoelectric Conf, Baltimore, VA, August 1999, pp 256-259.
  8. C.-J. Kim, “Micromachines Driven by Surface Tension”, AIAA 99-3800, 30th AIAA Fluid Dynamics Conference, Norfolk, VA, June-July 1999, pp. 1-6. (Invited lecture)
  9. T. Yi and C.-J. Kim, “Microscale Material Testing: Etchant Effect on the Tensile Strength,” Proc. Int. Conf. Solid-State Sensors and Actuators (Transducers’99), Sendai, Japan, June 1999, pp. 518-521.
  10. J. Ok, M. Chu, and C.-J. Kim, “Pneumatically Driven Microcage for Micro-Objects in Biological Liquid”, Proc. IEEE Conf. Micro Electro Mechanical Systems (MEMS ’99), Orlando, FL, Jan. 1999, pp. 459-463.

]]> http://cjmems.seas.ucla.edu/?feed=rss2&p=183 0 2000 Publications http://cjmems.seas.ucla.edu/?p=177 http://cjmems.seas.ucla.edu/?p=177#comments Fri, 04 Feb 2011 01:52:50 +0000 Annie http://cjmems.seas.ucla.edu/wordpress/?p=177 Journal Papers
  1. Q. Chen, D.-J. Yao, C.-J. Kim, and G. P. Carman, “Investigating the Influence of Fabrication Process and Crystal Orientation on Shear Strength of Silicon Microcomponents”, Journal of Material Science, Vol. 35, No. 21, November 2000, pp. 5465-5474.
  2. J. Lee and C.-J. Kim, “Surface-Tension-Driven Microactuation Based on Continuous Electrowetting”, J. Microelectromechanical Systems, Vol. 9, No. 2, June 2000, pp. 171-180.
  3. T. Yi, L. Li, and C.-J. Kim, “Microscale Material Testing of Single Crystalline Silicon: Process Effects on Surface Morphology and Tensile Strength”, Sensors and Actuators, Vol. 83, May 2000, pp. 172-178.

Conference Papers

  1. J.-A. Paik, N. Kitazawa, S.-K. Fan, C.-J. Kim, M. C. Wu, and B. Dunn, “Preparation of Mesoporous Oxides for MEMS Structures”, Proc. Materials Research Society Symp., Vol. 657, Boston, MA, Nov.-Dec. 2000, pp. EE7.3.1-EE7.3.6.
  2. L. Latorre, J. Kim, P. Nouet, C.-J. Kim, “Electrostatic Actuation of Microscale Liquid Metal Droplets: Analysis, Experiment, and FEM Simulation”, Proc. MEMS-Vol. 2, ASME Int. Mechanical Engineering Congress and Exposition, Orlando, FL, Nov. 2000, pp. 105-110.
  3. D.-J. Yao, G. Chen, and C.J. Kim, “Design of Thin-Film Thermoelectric Microcoolers”, HTD Vol. 366-2, ASME Int. Mechanical Engineering Congress and Exposition, Orlando, FL, Nov. 2000, pp. 345-351.
  4. C.-J. Kim, “Microfluidics Using the Surface Tension Force in Microscale”, SPIE Symp. Micromachining and Microfabrication, Vol. 4177, Santa Clara, CA, Sept. 2000, pp. 49-55. (Invited paper)
  5. L. Li, T. Yi, and C.-J. Kim, “Effect of Mask-to-Crystal Direction Misalignment on Fracture Strength of Silicon Microbeam”, Proc. Microscale Systems: Mechanics and Measurements Symp., Society for Experimental Mechanics, IX International Congress, Orlando, FL, June, 2000, pp. 36-40.
]]> http://cjmems.seas.ucla.edu/?feed=rss2&p=177 0 2001 Publications http://cjmems.seas.ucla.edu/?p=175 http://cjmems.seas.ucla.edu/?p=175#comments Fri, 04 Feb 2011 01:51:08 +0000 Annie http://cjmems.seas.ucla.edu/wordpress/?p=175 Conference Papers
  1. D.-J. Yao, G. Chen, and C.-J. Kim, “Low Temperature Eutectic Bonding for In-Plane Type Micro Thermoelectric Cooler”, Proc. ASME Int. Mechanical Engineering Congress and Exposition, New York, NY, Nov. 2001, IMECE2001/MEMS-23901.
  2. W. Shen, J. Kim, and C.-J. Kim, “Resistance of Liquid-Metal Droplets Against Actuation on Microstructured Surfaces”, Proc. ASME Int. Mechanical Engineering Congress and Exposition, New York, NY, Nov. 2001, IMECE2001/MEMS-23830.
  3. S. K. Cho, H. Moon, J. Fowler, S.-K. Fan, and C.-J. Kim, “Splitting a Liquid Droplet for Electrowetting-Based Microfluidics”, Proc. ASME Int. Mechanical Engineering Congress and Exposition, New York, NY, Nov. 2001, IMECE2001/MEMS-23831.
  4. C.-J. Kim, “Micropumping by Electrowetting”, Proc. ASME Int. Mechanical Engineering Congress and Exposition, New York, NY, Nov. 2001, IMECE2001/HTD-24200.
  5. F. Saeki, J. Baum, H. Moon, J.-Y. Yoon, C.-J. Kim, and R. L. Garrell, “Electrowetting on Dielectrics (EWOD): Reducing Voltage Requirement for Microfluidics”, American Chemical Society National Meeting, Chicago, IL, August 2001.
  6. R. T. Edwards and C.-J. Kim, “Breaking the Resistivity Barrier”, Proc. The 3rd NASA/DoD Workshop on Evolvable Hardware, July 2001, Pasadena, CA, pp. 167-171.
  7. J. Kim, W. Shen, L. Latorre, and C.-J. Kim, “A Micromechanical Switch with Electrostatically Driven Liquid-Metal Droplet”, Proc. Int. Conf. Solid-State Sensors and Actuators (Transducers’01), June 2001, Munich, Germany, pp. 748-751.
  8. D.-J. Yao, C.-J. Kim, G. Chen, J. L. Liu, K. L. Wang, J. Snyder, and J.-P. Fleurial, “MEMS Thermoelectric Microcoolers”, Proc. 20th International Conference on Thermoelectrics, Beijing, P. R. China, June 2001, pp. 401-404.
  9. J. Lee, H. Moon, J. Fowler, C.-J. Kim, and T. Schoellhammer, “Addressable Micro Liquid Handling by Electric Control of Surface Tension”, Proc. IEEE Conf. Micro Electro Mechanical Systems (MEMS ’01), Interlaken, Switzerland, Jan. 2001, pp. 499-502.
  10. S.-K. Fan, J.-A. Paik, P. R. Patterson, M. C. Wu, B. Dunn, and C.-J. Kim, “MEMS with Thin-Film Aerogel”, Proc. IEEE Conf. Micro Electro Mechanical Systems (MEMS ’01), Interlaken, Switzerland, Jan. 2001, pp. 122-125.
  11. K.-S. Yun, I.-J. Cho, J.-U. Bu, G.-H. Kim, Y.-S. Jeon, C.-J. Kim, and E. Yoon, “A Micropump Driven by Continuous Electrowetting Actuation for Low Voltage and Low Power Operations”, Proc. IEEE Conf. Micro Electro Mechanical Systems (MEMS ’01), Interlaken, Switzerland, Jan. 2001, pp. 487-490.
]]> http://cjmems.seas.ucla.edu/?feed=rss2&p=175 0 2002 Publications http://cjmems.seas.ucla.edu/?p=169 http://cjmems.seas.ucla.edu/?p=169#comments Fri, 04 Feb 2011 01:42:07 +0000 Annie http://cjmems.seas.ucla.edu/wordpress/?p=169 Journal Papers
  1. F.-G. Tseng, C.-J. Kim, and C.-M. Ho, “A High Resolution High Frequency Monolithic Top-Shooting Microinjector Free of Satellite Drops: Part II: Fabrication, Implementation, and Characterization”, J. Microelectromechanical Systems, Vol. 11, No. 5, October 2002, pp. 437-447.
  2. F.-G. Tseng, C.-J. Kim, and C.-M. Ho, “A High Resolution High Frequency Monolithic Top-Shooting Microinjector Free of Satellite Drops: Part I, Concept, Design and Model”, J. Microelectromechanical Systems, Vol. 11, No. 5, October 2002, pp. 427-436.
  3. K.-S. Yun, I.-J. Cho, J.-U. Bu, C.-J. Kim, and E. Yoon “A Surface-Tension Driven Micropump for Low Voltage and Low Power Operations”, J. Microelectromechanical Systems, Vol. 11, No. 5, October 2002, pp. 454-461.
  4. H. Moon, S. K. Cho, R. L. Garrell, and C.-J. Kim, “Low Voltage Electrowetting-On-Dielectric”, J.  Applied Physics, Vol. 92, No. 7, October 2002, pp. 4080-4087.
  5. J.-A. Paik, S.-K. Fan, C.-J. Kim, M. C. Wu, and B. Dunn, “Micromachining of Mesoporous Oxide Films for Microelectromechanical System Structures”, J. Materials Research, Vol. 17, No. 8, August 2002, pp. 2121-2129.
  6. L. Latorre, J. Kim, J. Lee, P.-P. de Guzman, H. J. Lee, P. Nouet, and C.-J. Kim, “Electrostatic Actuation of Microscale Liquid-Metal Droplets”, J. Microelectromechanical Systems, Vol. 11, No. 4, August 2002, pp. 302-308.
  7. J. Kim, W. Shen, L. Latorre, and C.-J. Kim, “A Micromechanical Switch with Electrostatically Driven Liquid-Metal Droplet”, Sensors and Actuators, Vol. A97-98, April 2002, pp. 672-679.
  8. J. Lee, H. Moon, J. Fowler, T. Schoellhammer, and C.-J. Kim, “Electrowetting and electrowetting-on-dielectric for microscale liquid handling”, Sensors and Actuators, Vol. A95, Issues 2-3, February 2002, pp. 259-268.

Conference Papers

  1. G. Baure, G. Lee, C.-J. Kim, and B. Dunn, “Fabrication of Electrode Arrays Based on Surface Micromachining”, the 202nd Meeting of the Electrochemical Society, Salt Lake City, UT, October 2002, pp. (Proceedings not out yet)
  2. G. Baure, G. Lee, C.-J. Kim, and B. Dunn, “Fabrication of 3D Half-Cell Electrode Arrays”, in Micropower and Microdevices edited by E. J. Brandon, A. Ryan, J. Harb, R. Ulrich,  Electrochemical Society, Pennington, NJ, 2002, Vol. PV2002-25.
  3. J. G. F. Tsai and C.-J. Kim, “A Silicon-Micromachined Pin for Contact Droplet Printing”, 2nd Joint EMBS-BMES Conf., Houston, TX, October 2002, pp.1632-1633.
  4. R. L. Garrell, J.-Y. Yoon, H. Moon, J. Fowler, and C.-J. Kim, “Low Power Reconfigurable Microfluidic Chips for Chem-Bio Detection and Monitoring”, 224th American Chemical Society National Meeting, Boston, MA, August 2002.
  5. S.-K. Fan, P.-P. de Guzman, and C.-J. Kim, “EWOD Driving of Droplet on NxM Grid Using Single-Layer Electrode Patterns, Tech. Dig., Solid-State Sensor, Actuator, and Microsystems Workshop, Hilton Head Island, SC, June 2002, pp. 134-137.
  6. P. Y. Chiou, M. Wu, H. Moon, C.-J. Kim, and H. Toshiyoshi, “Optical Actuation of Microfluidics Based on Opto-Electrowetting, Tech. Dig., Solid-State Sensor, Actuator, and Microsystems Workshop, Hilton Head Island, SC, June 2002, pp. 269-272.
  7. S. K. Cho, S.-K. Fan, H. Moon, and C.-J Kim, “Toward Digital Microfluidic Circuits: Creating, Transporting, Cutting and Merging Liquid Droplets by Electrowetting-Based Actuation”, Proc. IEEE Conf. MEMS, Las Vegas, NV, Jan. 2002, pp. 32-35.
  8. J. Fowler, H. Moon and C.-J Kim, “Enhancement of Mixing by Droplet-Based Microfluidics”, Proc. IEEE Conf. MEMS, Las Vegas, NV, Jan. 2002, pp. 97-100.
  9. W. Shen, J. Kim, and C.-J Kim, “Controlling the Adhesion Force by Physical Surface Modification for Electrostatic Actuation of Microscale Mercury Drop”, Proc. IEEE Conf. MEMS, Las Vegas, NV, Jan. 2002, pp. 52-55.
  10. J. Kim and C.-J Kim, “Nanostructured Surfaces for Dramatic Reduction of Flow Resistance in Droplet-based Microfluidics”, Proc. IEEE Conf. MEMS, Las Vegas, NV, Jan. 2002, pp. 479-482.
]]> http://cjmems.seas.ucla.edu/?feed=rss2&p=169 0 2003 Publications http://cjmems.seas.ucla.edu/?p=166 http://cjmems.seas.ucla.edu/?p=166#comments Fri, 04 Feb 2011 01:37:46 +0000 Annie http://cjmems.seas.ucla.edu/wordpress/?p=166 Book Chapters
  1. Chapter 18: “The Use of Surface Tension for the Design of MEMS Actuators,” in Nanotribology: Critical Assessment and Research Needs, C.-J. Kim, pp. 239-246. Edited by S.M. Hsu and Z.C. Ying, Kluwer Academic Publishers, Boston, MA, 2003.

Journal Papers

  1. D. Huh, A. H. Tkaczyk, J. H. Bahng, Y. Chang, H.-H. Wei, B. Grotberg, C.-J. Kim, K. Kurabayashi, and S. Takayama, “Reversible Switching of High-Speed Air-Liquid Two-Phase Flows Using Electrowetting-Assisted Flow-Pattern Change”, J. Am. Chem. Soc., Vol. 125, No. 48, 2003, pp. 14678-14679.
  2. T. B. Jones, J. D. Fowler, Y. S. Chang, and C.-J. Kim, “Frequency-Based Relationship of Electrowetting and Dielectrophoretic Liquid Microactuation”, Langmuir, Vol. 19, No. 18, 2003, pp. 7646-7651.
  3. B. Shapiro, H. Moon, R. Garrell, and C.-J. Kim. “Equilibrium Behavior of Sessile Drops under Surface Tension, Applied External Fields, and Material Variations”, Journal of Applied Physics, Vol. 93, No. 9, 2003, pp. 5794-5811.
  4. P. Y. Chiou, H. Moon, H. Toshiyoshi, C.-J. Kim and M. C. Wu, “Light Actuation of Liquid by Optoelectrowetting”, Sensors and Actuators A, Vol. 104, 2003, pp. 222-228.
  5. S. K. Cho, H. Moon, and C.-J Kim, “Creating, Transporting, Cutting, and Merging Liquid Droplets by Electrowetting-Based Actuation for Digital Microfluidic Circuits”, J. Microelectromechanical Systems, Vol. 12, No. 1, February 2003, pp. 70-80.

Conference Papers

  1. J. G. F. Tsai, Z. Chen, B. Merriman, S. Nelson, and C.-J. Kim, “Shape-Encoded Particle for DNA Analysis”, Proc. Int. Conf. Solid State Sensors, Actuators and Microsystems (Transducers ’03), Boston, MA, June 2003, pp. 1239-1242.
  2. U.-C. Yi and C.-J. Kim, “Soft Printing of Droplets Digitized by Electrowetting”, Transducers Proc. Int. Conf. Solid State Sensors, Actuators and Microsystems (Transducers ’03), Boston, MA, June 2003, pp. 1804-1807.
  3. W. Shen, R. T. Edwards, and C.-J. Kim, “Mercury Droplet Microswitch for Re-Configurable Circuit Interconnect”, Proc. Int. Conf. Solid State Sensors, Actuators and Microsystems (Transducers ’03), Boston, MA, June 2003, pp. 464-467.
  4. Y. Lu and C.-J. Kim, “Micro-Finger Articulation by Pneumatic Parylene Balloons”, Proc. Int. Conf. Solid State Sensors, Actuators and Microsystems (Transducers ’03), Boston, MA, June 2003, pp. 276-279.
  5. Z. Chen, J. G. F. Tsai, B. Merriman, J. Chen, C.-J. Kim, and S. Nelson, “Shape Encoded particles for Genomic Analysis”, Abstracts of Papers, Symposium LXVIII 2003, the LXVII Cold Spring Harbor Symp. Quantitative Biology, the Genome of Homo Sapiens, May-June 2003, pg. 40.
  6. C. W. Kwon, G. Baure, G. G. Lee, F. Chamran, D. Sun, D. Perepichka, C.-J. Kim, S. Tolbert, F. Wudl, and B. Dunn, “Fabrication and Properties of Electrode Array Structures and Materials”, the 203rd Meeting of the Electrochemical Society, Paris, France, April-May, 2003, pp. 1-1.
  7. D.-S. Meng, J. Kim, and C.-J. Kim, “A Distributed Gas Breather for the Micro Direct Methanol Fuel Cell”, Proc. IEEE Conf. MEMS, Kyoto, Japan, January 2003, pp. 534-537.
  8. S.-K. Fan, C. Hashi, and C.-J. Kim, “Manipulation of Multiple Droplets on NxM Grid by Cross-Reference EWOD Driving Scheme and Pressure-Contact Packaging”, Proc. IEEE Conf. MEMS, Kyoto, Japan, January 2003, pp. 694-697.
  9. B. Shapiro, H. Moon, R. L. Garrell, C.-J. Kim, “Modeling of Electrowetted Surface Tension for Addressable Microfluidic Systems: Dominant Physical Effects, Material Dependences, and Limiting Phenomena”, Proc. IEEE Conf. MEMS, Kyoto, Japan, January 2003, pp. 201-205.
  10. S. K. Cho and C.-J. Kim, “Particle Separation and Concentration Control for Digital Microfluidic Systems”, Proc. IEEE Conf. MEMS, Kyoto, Japan, January 2003, pp. 686-689.
  11. J. Tsai, Z. Chen, S. Nelson, and C.-J. Kim, “A Silicon-Micromachined Pin for Contact Droplet Printing”, Proc. IEEE Conf. MEMS, Kyoto, Japan, January 2003, pp. 295-295-298.
]]> http://cjmems.seas.ucla.edu/?feed=rss2&p=166 0 2004 Publications http://cjmems.seas.ucla.edu/?p=155 http://cjmems.seas.ucla.edu/?p=155#comments Fri, 04 Feb 2011 01:28:52 +0000 Annie http://cjmems.seas.ucla.edu/wordpress/?p=155 Journal Papers
  1. J.-A. Paik, S.-K. Fan, H. Chang, C.-J. Kim, M. Wu, and B. Dunn, “Development of Spin Coated Mesoporous Oxide Films for MEMS Structures”, J. Electroceramics, Vol. 13, 2004, pp. 423-428.
  2. U.-C. Yi and C.-J. Kim, “Soft Printing of Droplets Pre-Metered by Electrowetting”, Sensors and Actuators A, Vol. 114, No. 2-3, 2004, pp. 347-354.
  3. A. R. Wheeler, H. Moon, C.-J. Kim, J. A. Loo, and R. L. Garrell, “Electrowetting-Based Microfluidics for Analysis of Peptide and Proteins by Matrix Assisted Laser Desorption/Ionization Mass Spectrometry (MALDI-MS)”, Analytical Chemistry, Vol. 76, No. 16, Aug. 2004, pp. 4833-4838.
  4. R. Yokokawa, J.-A. Paik, B. Dunn, N. Kitazawa, H. Kotera, and C.-J. Kim, “Mechanical Properties of Aerogel-Like Thin Films Used for MEMS”, J. Micromechanics and Microengineering, Vol. 14, 2004, pp. 681-686.

Conference Papers

  1. D.-S. Meng and C.-J. Kim, “Self-Aligned Micro Bubble Arrays by Using Surface Tension”, Proc. ASME Int. Mechanical Engineering Congress and Exposition, Anaheim, CA, Nov. 2004, CD Vol. 2, IMECE2004-62182.
  2. R. He and C.-J. Kim, “Post-Deposition Porous Etching of Polysilicon: Fabrication and Characterization of Free-Standing Structures”, Proc. ASME Int. Mechanical Engineering Congress and Exposition, Anaheim, CA, Nov. 2004, CD Vol. 2, IMECE2004-62198.
  3. W. Shen, R. T. Edwards, and C.-J. Kim, “Fabrication, Packaging and Characterization of Mercury Droplet Switches Integrated On CMOS Chip, Proc. ASME Int. Mechanical Engineering Congress and Exposition, Anaheim, CA, Nov. 2004 CD Vol. 2, IMECE2004-62163.
  4. F. Chamran, Y. Yeh, B. Dunn, and C.-J. Kim, “3-Dimensional Half-Cell Microbatteries”, Proc. ASME Int. Mechanical Engineering Congress and Exposition, Anaheim, CA, Nov. 2004, CD Vol. 2, IMECE2004-61925.
  5. J. G. F. Tsai, C.-J. Kim, Z. Chen, and S. Nelson, “ Silicon Microarray Pin with Selective Hydrophobic Coating”, Proc. ASME Int. Mechanical Engineering Congress and Exposition, Anaheim, CA, Nov. 2004, CD Vol. 2, IMECE2004-62062.
  6. A. R. Wheeler, H. Moon, C.-J. Kim, J. A. Loo, and R. L. Garrell, “Integrated Sample Purification in EWOD-MALDI-MS”, Proc. Micro Total Analysis System, Malmö, Sweden, Sept. 2004, pp. 204-206.
  7. T. Yeh, D. Min, B. Dunn, F. Chamran, C.-J. Kim, D. Sun, and S. Tolbert, “Vanadium Oxide Nanoroll Electrode Arrays for Secondary Lithium Batteries”, Symp. Intercalation Compounds for Battery Materials in the 206th Meeting of the Electrochemical Society, Honolulu, HI, Oct. 2004.
  8. C.-H. Choi, J. Kim, and C.-J. Kim, “Nanoturf Surfaces for Reduction of Liquid Flow Drag in Microchannels”, Proc. 3rd ASME Integrated Nanosystems Conf.: Design, Synthesis, and Applications, Pasadena, CA, Sept. 2004, CD, Nano2004-46078.
  9. D.-M. Meng, T. Cubaud, C.-M. Ho, and C.-J. Kim, “A Membrane Breather for Micro Fuel Cell with High Concentration Methanol”, Tech. Dig., Solid-State Sensor, Actuator and Microsystems Workshop, Hilton Head Island, SC, June 2004, pp. 141-144.
  10. R. He, L. Fan, M. C. Wu, and C.-J. Kim, “Porous Polysilicon Formed by Electrochemical Etching for On-Chip Vacuum Encapsulation”, Tech. Dig., Solid-State Sensor, Actuator and Microsystems Workshop, Hilton Head Island, SC, June 2004, pp. 332-335.
  11. U.-C. Yi and C.-J. Kim, “Geometric Surface Modification of Nozzles for Complete Transfer of Liquid Drops”, Tech. Dig., Solid-State Sensor, Actuator and Microsystems Workshop, Hilton Head Island, SC, June 2004, pp. 164-167.
  12. A. R. Wheeler, R. L. Garrell, H. Moon, C.-J. Kim and J. A. Loo, “Electrowetting-on-Dielectric for Analysis of Peptides and Proteins by Matrix Assisted Laser-Desorption/Ionization Mass Spectrometry,” Tech. Dig., Solid-State Sensor, Actuator and Microsystems Workshop, Hilton Head Island, SC, June 2004, pp. 402-403.
  13. J. Gong, S.-K. Fan, and C.-J. Kim, “Portable Digital Microfluidics Platform with Active but Disposable Lab-On-Chip, Proc. IEEE Conf. MEMS, Maastricht, the Netherlands, Jan. 2004, pp. 355-358.
]]> http://cjmems.seas.ucla.edu/?feed=rss2&p=155 0