Journal Papers

  1. J. Simon, S. Saffer, F. Sherman, and C.-J. Kim, “Lateral Polysilicon Microrelays with a Mercury Micro-Drop Contact”, IEEE Trans. Industrial Electronics, Vol. 45, No. 6, Dec. 1998, pp. 854-860.
  2. T. K. Jun and C.-J. Kim, “Valveless Pumping using Traversing Vapor Bubbles in Microchannels”, J. Applied Physics, Vol. 83, No. 11, June 1998, pp. 5658-5664.
  3. Q. Chen, D.-J. Yao, C.-J. Kim, and G. P. Carman, “Development of Mesoscale Actuator Device with Micro Interlocking Mechanism”, J. Intelligent Material Systems and Structures, Vol. 9, No. 4, June 1998, pp. 449-457.
  4. J. J.-Y. Gill, L.V. Ngo, P. R. Nelson, and C.-J. Kim, “Elimination of Extra Spring Effect at the Step-Up Anchor of Surface-Micromachined Structure”, J. Microelectromechanical Systems, Vol. 7, No. 1, March 1998, pp. 114-121.
  5. C.-J. Kim, J. Y. Kim, and B. Sridharan, “Comparative Evaluation of Drying Techniques for Surface Micromachining”, Sensors and Actuators, Vol. 64, No. 1, Jan. 1998, pp. 17-26.

Conference Papers

  1. L.-S. Huang, B. Sridharan, C.-J. Kim, S. D. Collins, C. Gonzalez, and R. L. Smith, “Self-Assembled Microslider for MicroJoinery”, Proc. MEMS (DSC-Vol. 66), ASME Int. Mechanical Engineering Congress and Exposition, Anaheim, CA. Nov. 1998, pp. 499-504.
  2. Q. Chen, D.-J. Yao, C.-J. Kim, and G. P. Carman, “Influence of Fabrication and Crystal Orientation on the Strength of Silicon Microridges”, Proc. MEMS (DSC-Vol. 66), ASME Int. Mechanical Engineering Congress and Exposition, Anaheim, CA. Nov. 1998, pp. 413-420.
  3. F. Tseng, C.-J. Kim, and C.-M. Ho, “A Microinjector Free of Satellite Drops and Characterization of the Ejected Droplets”, Proc. MEMS (DSC-Vol. 66), ASME Int. Mech. Engineering Congress and Exposition, Anaheim, CA. Nov. 1998, pp. 89-95.
  4. J. Lee and C.-J. Kim, “Microactuation by Continuous Electrowetting Phenomenon and Silicon Deep RIE Process”, Proc. MEMS (DSC-Vol. 66), ASME Int. Mechanical Engineering Congress and Exposition, Anaheim, CA. Nov. 1998, pp. 475-480.
  5. C.-J. Kim, “Microgasketing and Adhesive Wicking for Fabrication of Micro Fluidic Devices”, Proc. Vol. 3515, Microfluidic Devices and Systems, SPIE Symp. Micromachining and Microfabrication, Santa Clara, CA, Sept. 1998, pp. 286-291 (invited paper).
  6. L.-S. Huang, S.-S. Lee, E. Motamedi, M. C. Wu, and C.-J. Kim, “Optical Coupling Analysis and Vibration Characterization for Packaging of 2×2 MEMS Vertical Torsion Mirror Switches”, Proc. Vol. 3513, Microelectronic Structures and MEMS for Optical Processing IV, SPIE Symp. Micromachining and Microfabrication, Santa Clara, CA, Sept. 1998, pp. 135-143.
  7. C.-J. Kim, “Microelectromechanical Systems (MEMS) at the UCLA Micromanufacturing Lab”, Dig. Papers, Int. Microprocesses and Nanotechnology Conf. (MNC’98), Kyungju, Korea, July 1998, pp. 54-55. (invited paper)
  8. F.-G. Tseng, C. S. Shih, C.-J. Kim, and C.-M. Ho, “Characterization of Droplet Injection Process of a Microinjector”, Book of Abstracts, 13th U.S. National Congress of Applied Mechanics, Gainesville, FL, June 1998, TB3 (unpaged volume).
  9. B. Sridharan and C.-J. Kim, and Long-Sun Huang, “Post-Packaging Release: A New Concept for Surface-Micromachined Devices”, Tech. Dig., Solid-State Sensor and Actuator Workshop, Hilton Head Island, SC, June 1998, pp. 225-228.
  10. S.-S. Lee, L.-S. Huang, C.-J. Kim, and M. C. Wu, “2x2 MEMS Fiber Optic Switches with Silicon Sub-mount for Low-Cost Packaging”, Tech. Dig., Solid-State Sensor and Actuator Workshop, Hilton Head Island, SC, June 1998, pp. 281-284.
  11. G. Chen, S.Q. Zhou, D.-Y. Yao, C.-J. Kim, X.Y. Zheng, Z.L. Liu, K.L. Wang, X.Sun, and M.S. Dresselhaus, “Heat Conduction in Alloy-Based Superlattices”, Proc. 17th Int. Conf. Thermoelectrics, Nagoya, Japan, May 1998, pp. 202-205.
  12. L.-S. Huang, S.-S. Lee, E. Motamedi, M. C. Wu, and C.-J. Kim, “MEMS Packaging for Micro Mirror Switches”, Proc. 48th Electronic Components & Technology Conference, Seattle, WA. May 1998, pp. 592-597.
  13. J. Kim, J. Simon, S. Saffer, and C.-J. Kim, “Mercury Contact Micromechanical Relays”, Proc. 46th Annual Int. Relay Conf, Oak Brook, IL, Apr. 1998, pp. 19-1-19-8.
  14. Q. Chen, D.-J. Yao, C.-J. Kim, and G. P. Carman, “Frequency Response of an Inchworm Motor Fabricated with Micro Machined Interlocking Surface Mesoscale Actuator Device (MAD)”, Proc. SPIE Vol. 3329, Conf. Smart Structures and Integrated Systems, San Diego, CA, Mar. 1998, pp. 768-779.
  15. J. Lee and C.-J. Kim, “Liquid Micromotor Driven by Continuous Electrowetting”, Proc. IEEE Micro Electro Mechanical Systems Workshop, Heidelberg, Germany, Jan. 1998, pp. 538-543.
  16. Q. Chen, D.-J. Yao, C.-J. Kim, and G.P. Carman, “Mesoscale Actuator Device with Micro Interlocking Mechanism”, Proc. IEEE Micro Electro Mechanical Systems Workshop, Heidelberg, Germany, Jan. 1998, pp. 384-389.
  17. F.-G. Tseng, C.-J. Kim, and C.-M. Ho, “A Novel Microinjector with Virtual Chamber Neck”, Proc. IEEE Micro Electro Mechanical Systems Workshop, Heidelberg, Germany, Jan. 1998, pp. 57-62.
  18. F. Sherman, S. Tung, C.-J. Kim, C.-M. Ho, and J. Woo, “In-Plane Microactuator for Fluid Control Application”, Proc. IEEE Micro Electro Mechanical Systems Workshop, Heidelberg, Germany, Jan. 1998, pp. 454-459.

Comments are closed.